As far as I am concerned, the only thing iRedmail need is the cert+key, not the fullchain. They should all be valid.
Re: iRedmail SSL issue
↧
↧
Re: Relay whit sendmail
- If you're sending email from localhost (iRedMail), this should be fine.
- Best option: send email with SMTP authentication.
↧
Re: SoGo EAS Unable to Send mail on iOS
I think you pasted unrelated log in first post. 
Could you try again and extract the log?
↧
Re: Postfix configuration - Hostname parameters
Ascar wrote:
I was just looking for a way to work around the warning message which MXToolbox is generating about the mismatch between the mail server's CNAME and the SMTP banner. MXToolbox says it is not an error, it is a warning.
It's very common that one server serves many mail domains, so this warning doesn't matter.
↧
Re: Mail Going to Spam && Zendesk
I just want to repeat myself: "After email left your server, it's not under you control. You cannot tell others how to treat your email. So it's normal that it goes to Spam/junk folder, even you have correct DNS records, DKIM signing, etc."
You send normal email, no any spamming content, but, again, you don't control other's server. They don't always act as you wish.
↧
↧
Re: iRedmail SSL issue
gao wrote:
However, I cannot connect to the mail server via imap/smtp after this. Does iRedmail support wildcard SSL?
Back to your issue: what do you mean "cannot connect" here?
Btw, would you like to purchase the iRedAdmin-Pro license again since i already refunded the payment few days ago? 
↧
Re: iRedmail SSL issue
When connection through mac client or ios client, it says the verification of the user has failed despite entering the correct password.
I have never purchased the pro account so I have no idea what is going on. As a student, I probably won't need the pro features yet. Would definately support this program when I'm financially independent!
↧
Re: iRedmail SSL issue
gao wrote:
When connection through mac client or ios client, it says the verification of the user has failed despite entering the correct password.
What's the related error in Dovecot log file?
gao wrote:
I have never purchased the pro account so I have no idea what is going on. As a student, I probably won't need the pro features yet. Would definately support this program when I'm financially independent!
Oops, my mistake, sorry. The buyer has same name as your forum name. I apologize.
↧
Re: The problem with SMTPs
ppnm wrote:
Should I fix this on the client or server side? (I didn't use aliases or maillists)
Client side.
↧
↧
Re: iRedmail SSL issue
Nov 3 01:51:50 srv dovecot: imap-login: Disconnected (no auth attempts in 3 secs): user=<>, rip=196.52.43.119, lip=104.129.20.183, TLS handshaking: SSL_accept() syscall failed: Success, session=<04o45bh50sfENCt3>
Nov 3 11:12:42 srv dovecot: imap-login: Disconnected (no auth attempts in 10 secs): user=<>, rip=107.170.216.33, lip=104.129.20.183, session=<rAgLu8B5aplrqtgh>
Nov 3 17:49:46 srv dovecot: imap-login: Disconnected (no auth attempts in 1 secs): user=<>, rip=139.162.109.245, lip=104.129.20.183, session=<sRwNR8Z5oLyLom31>
Nov 3 18:51:25 srv dovecot: imap-login: Login: user=<someone@example.com>, method=PLAIN, rip=192.83.228.246, lip=104.129.20.183, mpid=21039, TLS, session=<HI+RI8d5FGHAU+T2>
Nov 3 18:51:26 srv dovecot: imap(someone@example.com): Logged out in=61 out=667
↧
Re: iRedmail SSL issue
Also, if I want to disable dovecot pop3, I just go to /etc/dovecot/dovecot.conf and then change protocols to
protocols = imap sieve lmtp
Right?
What is LMTP used for? Local mail transport?
↧
Re: iRedmail SSL issue
gao wrote:
Nov 3 18:51:25 srv dovecot: imap-login: Login: user=<someone@example.com>, method=PLAIN, rip=192.83.228.246, lip=104.129.20.183, mpid=21039, TLS, session=<HI+RI8d5FGHAU+T2>
Nov 3 18:51:26 srv dovecot: imap(someone@example.com): Logged out in=61 out=667
This imap auth succeeded, TLS.
gao wrote:
Also, if I want to disable dovecot pop3, I just go to /etc/dovecot/dovecot.conf and then change protocols to
protocols = imap sieve lmtp
Right?
Right.
gao wrote:
What is LMTP used for? Local mail transport?
Yes.
↧
Re: Connection to storage server failed.
Thank you
↧
↧
amavisd-snmp-subagent not working
==== REQUIRED BASIC INFO OF YOUR IREDMAIL SERVER ====
- iRedMail version (check /etc/iredmail-release): 0.9.7
- Linux/BSD distribution name and version: Devuan
- Store mail accounts in which backend (LDAP/MySQL/PGSQL):PGSQL
- Web server (Apache or Nginx):Apache
====
At boot i get this message from amavis services :
[warn] Not starting amavisd-snmp-subagent - edit /etc/default/amavisd-snmp-subagent to enable it ... (warning).
And after editing the file and activating this service i get :
[....] Restarting amavis snmp subagent (bdb version): amavisd-snmp-subagentCan't locate NetSNMP/OID.pm in @INC (you may need to install the NetSNMP::OID module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/x86_64-linux-gnu/perl5/5.24 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at /usr/sbin/amavisd-snmp-subagent line 130.
BEGIN failed--compilation aborted at /usr/sbin/amavisd-snmp-subagent line 130.
failed!
How to solve this issue ?
This issue have been around since i installed iredmail , never worked but it is still active in init.d
How much important it is and what is its role in the server ?
I dont have any issues receiving emails or sending them , however it makes me wonder why was this service installed if it is not working ?
Thank you
↧
Re: iRedmail SSL issue
Then why can't I login from mac/iOS client?
↧
Re: iRedmail SSL issue
↧
Can I re-run installer to the nginx components?
==== REQUIRED BASIC INFO OF YOUR IREDMAIL SERVER ====
- iRedMail version (check /etc/iredmail-release): 0.9.8
- Linux/BSD distribution name and version: Ubuntu 18.04
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): mysql
- Web server (Apache or Nginx): not Test?
- Manage mail accounts with iRedAdmin-Pro? No
- [IMPORTANT] Related original log or error message is required if you're experiencing an issue.
====
I ran the initial installation leaving out the Nginx option...
I'm now thinking to change my mind, and wished I had installed those Nginx components!
Can I re-run the installer to add, or will that screwup the Postfix and Dovecot stuff which is working fine.
Thanks
↧
↧
Re: iRedMail-0.9.8
ZhangHuangbin wrote:
Try this:
CREATE VIEW sogo.aliases (c_uid, c_name, c_password, c_cn, mail, domain) AS SELECT address, name, '', name, address, domain FROM vmail.alias WHERE active=1;
Hi,
Thanks for support but this option is totally different from what I'm looking.
It will give aliases (address book) additionally from Global Address Book.
What I'm looking is sender email address + assigned aliases.
this is related to MailFieldNames.
Originally it configured: "MailFieldNames = (mail);"
what I'm looking for is something like this: "MailFieldNames = (mail, aliases);"
If you know how the actual configuration should look like please share you knowledge.
↧
Re: iRedMail-0.9.8
s.juozaitis wrote:
What I'm looking is sender email address + assigned aliases.
Sorry i misunderstood this.
But the implementation is very similar: change the sql table name to "forwardings", change the sql columns you need to query.
↧
Re: Can I re-run installer to the nginx components?
Try this:
- Open file iRedMail-0.9.8/config, add one line:
export WEB_SERVER='nginx'- Re-run iRedMail installer.
WARNING: it reads file iRedMail-0.9.8/runtime/install.status to understand what's installed and what's not, if you don't have this file, do NOT do this.
↧
More Pages to Explore .....
